5-2, Marunouchi 2-chome Chiyoda-ku
+81 3 3283 4736
MITSUBISHI GAS CHEMICAL is one of the leading company manufactures polymer in Japan. We show SOLID LUBRICANT for aerospace, automotive and bike application. The SOLID LUBRICANT for composites, aluminum and titanium is made from water soluble resin. Customer benefits are 1) dry machining, 2) improvement of cutting surface quality and hole accuracy, 3) tool life extension and cost reduction, 4) improvement of productivity, 5) less cutting dust scattering.
■The SOLID LUBRICANT for composites, aluminum and titanium
Discover Mitsubishi Gas Chemical’s Solid lubricant which is made from water soluble resin. During machining it transfers onto the tool surface and generates very thin but high lubricative film. It reduces friction heat, extends tool life and increases feed rate. Our technology shows high performance especially in machining of CFRP(UD). Delamination and uncut fibers will be dramatically reduced. Our solid lubricant is in innovative sheet form with adhesive which is very simple to apply on the work piece and after machining you can easily peel it off by hand.
1) Dry machining
SOLID LUBRICANT is a sheet form which is made from water-soluble resin, not oil. It has a significant lubrication performance. You can put SOLID LUBRICANT on the top or bottom of workpiece, and start machining. After machining, just remove it. That is all quite simple. SOLID LUBRICANT is a dry process, solvent cleaning after machining is unnecessary.
2) Improvement of cutting surface quality and hole accuracy
SOLID LUBRICANT gives a significant lubrication performance on tool during machining. It improves cutting surface quality and hole accuracy.
3) Tool life extension and cost reduction
SOLID LUBRICANT reduces friction heat and wear of tools. It enables stable cutting surface temperature during machining for no heat shock and reduction in chipping of tools.
4) Improvement of productivity
SOLID LUBRICANT gives a significant lubrication performance on tool during machining. It enables higher feed rate machining, for instance, three (3) times.
5) Less cutting dust scattering.
SOLID LUBRICANT is low melting temperature. So, CFRP cutting dust scattering during machining is reduced for better working environment.
Ask for invitation