Die COMPOSITES EUROPE ist die Branchenveranstaltung für Verbundwerkstoffe, deren Herstellung, Verarbeitung und Anwendung | COMPOSITES EUROPE is the industry event for composite materials, manufacturing, processing and application.

Product groups

1. - Raw materials

1.1 - Chemicals

1.1.1 - Resins

1.1.1.1 - Epoxy

1.1.1.2 - Polyester

1.1.1.3 - Vinyl Ester

1.1.1.4 - Phenolic

1.1.1.5 - PUR

1.1.1.6 - Silicone

1.1.1.7 - Adhesive resins

1.1.1.8 - Other resins

1.1.2 - Hardeners

1.1.3 - Gel Coats

1.1.4 - Other Chemicals

1.2 - Fillers

1.2.1 - (Short) fibres

1.2.2 - Powder

1.2.3 - Pellets

1.2.4 - Other fillers

1.3 - Additives

1.3.1 - Processing Aids

1.3.2 - Modifiers

1.3.3 - Accelerators

1.3.4 - Dyes / Pigments

1.3.5 - Nanoparticles

1.3.6 - Dye Pastes

1.3.7 - Other Additives

1.4 - Thermoplastics

1.5 - Core Materials

1.5.1 - Foam structures

1.5.1.1 - Thermoplastic Resin

1.5.1.2 - Thermosetting Resin

1.5.2 - Honeycomb Structures

1.5.3 - Natural Materials

1.5.4 - Laminatable or Impregnatable Core Materials

1.5.5 - Other Core Materials

1.6 - Other Raw Materials

2. - Fibres, Fibre Products, Intermediate and Semi-finished Products

2.1 - Reinforcements / Fibres

2.1.1 - Glass Fibres

2.1.2 - Carbon Fibres

2.1.2.1 - Woven Tubes / Tapes

2.1.2.2 - Braided Tubes / Wires

2.1.3 - Aramid Fibres

2.1.4 - Natural Fibres

2.1.5 - Metal Fibres

2.1.6 - Other Reinforcements / Fibres

2.2 - Chopped Fibres, Long Fibres

2.3 - Rovings

2.4 - Textiles (planar)

2.4.1 - Fabrics

2.4.2 - Non-crimp Fabrics

2.4.3 - Non-wovens

2.4.4 - Other Textiles (planar)

2.5 - Textiles (tubular)

2.5.1 - Meshwork

2.5.2 - Knitted Fabrics

2.5.3 - Glass Fibres - Woven Tubes / Tapes

2.5.4 - Glass Fibres - Braided Tubes / Wires

2.5.5 - Other Textiles (tubular)

2.6 - Prepregs

2.6.1 - Thermoset

2.6.2 - Thermoplastic

2.7 - Moulding Compounds

2.7.1 - Thermoset

2.7.1.1 - SMC

2.7.1.2 - BMC

2.7.1.3 - Other Thermosets

2.7.2 - Thermoplastic

2.7.2.1 - GMT

2.7.2.2 - LFT

2.7.2.3 - Other Thermoplastics

2.8 - Other Fibres, Fibre Products, Intermediate and Semi-Finished Products

3. - Manufacturers using

3.1 - Autoclave

3.2 - Closed Mould Processes

3.2.1 - RTM

3.2.2 - Resin Infusion

3.3.3 - Other Closed Mould Processes

3.3 - Open Mould Processes

3.3.1 - Hand Lay-up

3.3.2 - Spray-up

3.3.3 - Other Open Mould Processes

3.4 - Forming

3.5 - Tape Laying

3.6 - Filament Winding

3.7 - Pultrusion

3.8 - Press Processes

3.8.1 - Wet Moulding

3.8.2 - Compression Moulding

3.8.3 - Cold Moulding

3.8.4 - Hot Moulding

3.9 - Injection Moulding

3.10 - RIM

3.11 - Recycling

3.12 - Other Processors

4. - Processors/Refiners

4.1 - Surface Treatment

4.1.1 - Cleaning

4.1.2 - Painting

4.1.3 - Modification

4.1.4 - Other Surface Treatment

4.2 - Joining

4.2.1 - Positive Joints

4.2.2 - Non-positive Joints

4.2.3 - Adhesive Joints

4.2.4 - Other

4.3 - Cutting / Trimming

4.4 - Mechanical Processing

4.5 - Other Processors/Refiners

5. – Machines, Equipment, Consumable Materials

5.1 - Machinery for Fibre Production and Preparation

5.1.1 – Machinery for Fibre Production

5.1.2 – Fibre Cutting

5.1.3 - Other Machinery for Fibre Production and Preparation

5.2 - Machinery for Production of Textile Structures

5.2.1 – Machinery for Yarn Production

5.2.2 – Machinery for Non-wovens Production

5.2.3 – Filament-winding Machines

5.2.4 – Braiding Machines

5.2.5 – Fibre-placement Equipment

5.2.6 – Tapelaying Machines

5.2.7 – Warp Knitting Machines

5.2.8 – Looms

5.2.9 – Coating machines

5.2.10 – Cutting machines

5.2.11 - Other Machinery for Production of Textile Structures

5.3 - Machinery for Make-up of Reinforcing Textiles

5.3.1 - Machines for Cutting Preparation

5.3.2 - Machines for cutting

5.3.3 – Joining Technology

5.3.4 - Other Machinery for Make-up of Reinforcing Textiles

5.4 - Machines for Manufacture of Composites

5.4.1 - Extruders

5.4.2 - Planetary Roller Extruders

5.4.3 - Compounders

5.4.4 - Foam Systems

5.4.5 - SMC (Sheet Moulding Compounds)

5.4.6 - BMC (Bulk Moulding Compounds)

5.4.7 - GMT (glass mat reinforced thermoplastics)

5.4.8 - LFT (long-fibre reinforced thermoplastics)

5.4.9 - Film Vacuum Injection

5.4.10 - High-Pressure Injection

5.4.11 - Gap Impregnation

5.4.12 - Transfer Moulding

5.4.13 - RTM (Resin Transfer Moulding)

5.4.14 - High-pressure RTM (Resin Transfer Moulding)

5.4.15 - RRIM (Reinforced Reaction Injection Moulding)

5.4.16 - S-RIM (Structural Reaction Injection Moulding)

5.4.17 - Injection Moulding

5.4.17.1 - BMC (Bulk Moulding Compounds)

5.4.17.2 - Thermosetting BMC (Bulk Moulding Compounds)

5.4.17.3 - Short Glass Fibre Reinforced (SGF-IM)

5.4.17.4 - Long Glass Fibre Reinforced (LGF-IMM)

5.4.17.5 - Continuous Fibre Reinforced (D-LFT-IM)

5.4.17.6 - Textile Reinforced

5.4.18 - Centrifugal Casting Techniques

5.4.19 - Pultrusion Techniques

5.4.20 - Lamination Techniques

5.4.21 - Compression Moulding

5.4.22 - Continuous Moulding

5.4.23 - Thermoform Machines (Organic Sheets)

5.4.24 - Roll-forming Machines

5.4.25 – Rolling

5.4.26 – Autoclaves

5.4.27 - Other Machinery for Manufacture of Composites

5.5 - Machines for Material Preparation

5.5.1 - Material Feed and Metering Systems

5.5.2 - Mixers

5.5.3 - Driers

5.5.4 - Other Machines for Material Preparation

5.6 - Machines for Processing Composites

5.6.1 - Cutting and Splitting Machines

5.6.2 - Machines for Surface Treatment

5.6.3 - Other Machines for Processing Composites

5.7 - Tool and Mould Making

5.7.1 - Closed Impregnation Moulds

5.7.2 - One-piece Tool Moulds

5.7.3 - Mandrels

5.7.4 - Pultrusion Tools

5.7.5 - Extrusion Dies

5.7.5.1 - High pressure

5.7.5.2 - Low pressure

5.7.6 - Composite Tools

5.7.7 - Metal Tools

5.7.8 - Diamond Tools

5.7.9 - Machining Tools

5.7.10 - Other Tool and Mould Making

5.8 - Handling

5.8.1 - Robots

5.8.2 - Other Handling Equipment

5.8.3 - Linking and Transporting Devices

5.9 – Exhaust Air Systems

5.9.1 - Exhaust Air Purification VOC

5.9.2 - Exhaust Air Equipment / Vacuum Cleaning Systems

5.10 – Measuring and Testing Technology

5.10.1 - Non-destructive Testing

5.10.2 - Measuring Instruments - Surface Structure

5.10.3 - Measuring Instruments - Dimensional Accuracy

5.10.4 - Measuring Instruments - Material Properties

5.10.4.1 - Mechanical

5.10.4.2 - Thermal

5.10.4.3 - Chemical

5.10.4.4 - Other Measuring Instruments - Material Properties

5.10.5 - Image Processing and Optical Sensors

5.10.6 – Other Measuring and Testing Technology

5.11 - Machines for Recycling

5.12 - Consumables

5.12.1 - Vacuum Bagging etc.

5.12.2 - Mould Release Agents

5.12.3 – Safety Products

5.12.4 – Adhesives

5.12.5 - Other Consumable Materials

6. - Manufacturers of Products

6.1 - Panels

6.2 - Sandwich Panels

6.3 - Tubes

6.4 - Profiles

6.5 - Containers

6.6 - Moulded Parts

6.6.1 - Prototypes

6.6.2 - Series Production

6.7 - Other Manufacturers of Products

7. - Composite Products

7.1 - Glass Fibre Reinforced Plastics

7.2 - Carbon Fibre Reinforced Plastics

7.3 - Aramid Fibre Reinforced Plastics

7.4 - Natural Fibre Reinforced Plastics

7.5 - Metal Fibre Polymer Composites

7.6 - Metal Matrix Composites

7.7 - Ceramic Matrix Composites

7.8 - Metal Ceramic Composites

7.9 - Carbon Fibre Reinforced Carbon

7.10 - Fibre Reinforced Concrete

7.11 - Other Composite Products

8. - Components/Products for Application Industries

8.1 - Automotive (Cars and Trucks)

8.2 - Building / Construction

8.3 - Civil Engineering / Infrastructure

8.4 - Railways / Buses / Mass Transportation

8.5 - Electrical / Electronics

8.6 - Aircraft / Aerospace

8.7 - Industrial / General Engineering

8.8 - Consumer Products

8.9 - Corrosion Protection / Chemical Resistant Equipment

8.10 - Agriculture

8.11 - Marine / Shipbuilding

8.12 - Medical

8.13 - Offshore

8.14 - Sports, Leisure

8.15 - Defence

8.16 - Water Testing / Sewage

8.17 - Wind Energy

8.18 - Other Parts/Products for Application Industries

9. – Services

9.1 - Services

9.1.1 - Distributors

9.1.2 - Consultants

9.1.3 - Research Institutes / Organisations

9.1.4 - Educational/Training Institutions

9.1.5 - Independent Testing Organisations

9.1.6 - Publications/Publishers

9.1.7 - Recycling Services

9.1.8 - Standards Organisations

9.1.9 - Trade Associations

9.1.10 - CAD / CAM Service Providers

9.1.11 - Quality Assurance

9.1.12 - Prototype Construction

9.1.13 - Simulation/Dimensioning

9.1.14 - Fire Protection Systems

9.1.15 - Other Services

9.2 - Software

9.2.1 - Design

9.2.2 - Cost Estimating

9.2.3 - Materials Databases

9.2.4 - Machine Control

9.2.5 - Simulation

9.2.5.1 - Finite Element Simulation

9.2.5.2 - Process Simulation

Nomenclature COMPOSITES EUROPE 2012 for download [PDF | 36 KB]

Print page

Save exhibition date

Exhibitor contact

Have you exhibited before?

+49 211 90191-325
E-mail us!

Are you exhibiting for the first time?

+49 211 90191-308

Social Networks

Reed Exhibitions Deutschland GmbH
Völklinger Strasse 4
40219 Düsseldorf
Phone: +49 (0)211 90191 0 Fax: +49 (0)211 90191 170 E-Mail: info@reedexpo.de 51.212872, 6.761881 reedexpo